|
|
Thema: positioner |
|
I found the cause of the problem and it was not obvious:
the cable which comes from the 90cm measures 10m, the cable which comes from the 2m measures 35m.
the signal from the small antenna saturates the input of the tuner of the sf8008, I added a 20m cable extension and an 8 output splitter and there the signal drops in strength but almost not in quality and like that my system based on the AGC works!!!
the AGC signal is taken in the control loop of the sf8008 tuner then slightly amplified to arrive at the positioner on an analog/digital card (ad548 ).
Use is optional, it is triggered by pressing a button on the remote control.
This is an aid and not a mandatory process.
Ich habe die Ursache des Problems gefunden und sie war nicht offensichtlich:
Das Kabel, das von 90 cm kommt, misst 10 m, das Kabel, das von 2 m kommt, misst 35 m.
Das Signal der kleinen Antenne sättigt den Eingang des Tuners des SF8008. Ich habe eine 20-m-Kabelverlängerung und einen Splitter mit 8 Ausgängen hinzugefügt, und dort nimmt die Signalstärke ab, aber fast nicht die Qualität, und so funktioniert mein auf AGC basierendes System! !!
Das AGC-Signal wird im Regelkreis des SF8008-Tuners erfasst und dann leicht verstärkt, um auf einer analogen/digitalen Karte (AD548 ) zum Positionierer zu gelangen.
Die Nutzung ist optional, die Auslösung erfolgt per Knopfdruck auf der Fernbedienung.
Hierbei handelt es sich um eine Hilfestellung und nicht um einen verpflichtenden Vorgang.
|
|
Thema: positioner |
|
I am developing an AGC system for a satellite positioner.
I take the AGC signal at the receiver tuner.
on my main installation (2m prime focus) the variation is related to the signal level.
this signal decreases as it moves away from the ideal point.
I have just done the same test with an offset of 90cm and I have a strange reaction: the level of the AGC signal remains at 100% close to the ideal pointing then the quality drops to 0 as it moves away but the AGC signal remains at 100% !!!
I changed the LNB for an inverto but same result!
Ich entwickle ein AGC-System für einen Satellitenpositionierer.
Ich nehme das AGC-Signal am Receiver-Tuner ab.
Bei meiner Hauptinstallation (2 m Hauptfokus) hängt die Variation mit dem Signalpegel zusammen.
Dieses Signal nimmt ab, wenn es sich vom Idealpunkt entfernt.
Ich habe gerade den gleichen Test mit einem Versatz von 90 cm durchgeführt und habe eine seltsame Reaktion: Der Pegel des AGC-Signals bleibt bei 100 % in der Nähe der idealen Ausrichtung, dann sinkt die Qualität auf 0, wenn es sich wegbewegt, aber das AGC-Signal bleibt bei 100% !!!
Ich habe den LNB gegen einen Inverter ausgetauscht, aber das gleiche Ergebnis!
|
|
Thema: positioner |
|
To do tests on my new program I built an electrical extension cord with a single cable (7 wires) where there are the pulses and the motor wires.
in the main installation (30m) the cables are separated (2.5mm for the motors / 0.75mm for the pulses).
in my extension they are close: as a result I have lots of pulse errors!!!
I knew for a long time that you shouldn't do it like that!! but in a hurry I tried, it's not a good idea.
my friend captain jack had this problem and I convinced him to put separate cables and since then no more problems.
Um mein neues Programm zu testen, habe ich ein elektrisches Verlängerungskabel mit einem einzigen Kabel (7 Drähte) gebaut, in dem sich die Impulse und die Motordrähte befinden.
In der Hauptinstallation (30 m) sind die Kabel getrennt (2,5 mm für die Motoren / 0,75 mm für die Impulse).
In meiner Erweiterung liegen sie nahe beieinander: Dadurch habe ich viele Pulsfehler!!!
Ich wusste schon lange, dass man das nicht so machen sollte!! Aber in Eile habe ich es versucht, es ist keine gute Idee.
Mein Freund Captain Jack hatte dieses Problem und ich habe ihn überzeugt, separate Kabel zu verlegen, und seitdem keine Probleme mehr.
|
|
Thema: positioner |
|
dont forget to add lnb type ( circular/linear) ( with or without polarotor)
|
|
Thema: positioner |
|
Achten Sie auf die Sat-Namen:
turksat – nicht mehr als 18 Buchstaben im vollständigen Namen
pay attention to the sat names:
turksat --no more than 18 letters in the full name
|
|
Thema: positioner |
|
es kommt auf den Satellitenreceiver an!!
welches Gerät hast du?
|
|
Thema: positioner |
|
Ich habe meine Platinen erhalten.
Ich habe die Karte gebaut, die Werte angepasst und getestet!!!
Sehr nützlich im KU-Band (weniger effektiv im C-Band?).
Ich stelle den Startoffset P3 so ein, dass er auf einem nützlichen Niveau erkennt, und dann die Verstärkung P2, um eine maximale Amplitude zu erreichen.
In den folgenden Beispielen gibt es Astra19.2 mit einem Offset von 73 %, dann einer Anpassung und 99 %.
Das Zifferblatt zeigt den AGC-Pegel an, jedoch sofort und nicht wie auf dem Bildschirm. Darüber hinaus können Sie die Position anpassen, indem Sie den Kanal anzeigen.
Es ist sehr reaktiv, es wird einfacher, die maximale Position zu finden.
I received my circuit boards.
I built the map, adjusted the values and tested!!!
very useful on KU band (less effective on C band?).
I set the starting offset P3 to detect at a useful level then the gain P2 to have a maximum amplitude.
in the following examples there is astra19.2 with an offset of 73% then an adjustment and 99%.
the dial displays the AGC level but it is instantaneous, not like through the screen display, moreover you can adjust the position by viewing the channel.
it is very reactive, it becomes easier to find the maximum position.
https://satclub-thueringen.de/images/blu...letypes/jpg.gif
https://satclub-thueringen.de/images/blu...letypes/jpg.gif
https://satclub-thueringen.de/images/blu...letypes/jpg.gif
https://satclub-thueringen.de/images/blu...letypes/jpg.gif
https://satclub-thueringen.de/images/blu...letypes/jpg.gif
https://satclub-thueringen.de/images/blu...letypes/jpg.gif
|
|
Thema: Laminas Polarmount |
|
it is indeed the declination which is regulated by the elevation cylinder and the value varies little!
do not put the jack on the polar axis adjustment, as we often see!!!
as the declination varies little, the distance A-B must be maximum.
Es ist tatsächlich die Deklination, die durch den Höhenzylinder reguliert wird, und der Wert variiert kaum!
Setzen Sie den Wagenheber nicht auf die Polachsenverstellung, wie wir es oft sehen!!!
Da die Deklination kaum variiert, muss der Abstand A-B maximal sein.
https://satclub-thueringen.de/images/blu...letypes/jpg.gif
|
|
Thema: positioner |
|
The principle of my positioner (and others too)
It is to have a pointer (AZ or EL) which is the actual position of the parabola.
This value (for different reasons) can be erroneous or shifted but the positions originally assigned to each satellite position have not changed!!!
By reinitializing this pointer all the values in memory are again valid without having to be modified!!!
The limit values are there to prevent a mechanical blockage and have no influence on the memorized positions of the sats.
Das Prinzip meines Positionierers (und auch anderer)
Es soll einen Zeiger (AZ oder EL) haben, der die tatsächliche Position der Parabel anzeigt.
Dieser Wert kann (aus verschiedenen Gründen) fehlerhaft oder verschoben sein, aber die ursprünglich jeder Satellitenposition zugewiesenen Positionen haben sich nicht geändert!!!
Durch die Neuinitialisierung dieses Zeigers sind alle Werte im Speicher wieder gültig, ohne dass sie geändert werden müssen!!!
Die Grenzwerte dienen dazu, eine mechanische Blockade zu verhindern und haben keinen Einfluss auf die gespeicherten Positionen der Sats.
|
|
Thema: positioner |
|
when the positions are shifted (all) the method is as follows:
- enter the LIMITS menu.
- put yourself on the 3rd line (AZ or EL)
- shifted the dish to maximum reception
-then enter on the remote control keyboard the value that this satellite is supposed to have, ex FEMI 23.5° (2066)
- regardless of the position displayed at the start of this operation!!!!
- thus the pointer finds its value and all the positions already memorized are OK.
once again, the mount must be designed with large travels and not concentrate on a small space like the laminas.
Wenn die Positionen (alle) verschoben werden, ist die Methode wie folgt:
- Rufen Sie das Menü GRENZEN auf.
- Versetzen Sie sich in die 3. Zeile (AZ oder EL)
- Stellte die Schüssel auf maximalen Empfang
-Geben Sie dann auf der Fernbedienungstastatur den Wert ein, den dieser Satellit haben soll, z. B. FEMI 23,5° (2066).
- unabhängig von der Position, die zu Beginn dieses Vorgangs angezeigt wird!!!!
- Dadurch findet der Zeiger seinen Wert und alle bereits gespeicherten Positionen sind in Ordnung.
Auch hier muss die Halterung für große Verfahrwege ausgelegt sein und darf sich nicht wie die Lamellen auf einen kleinen Raum konzentrieren.
|
|
Thema: Egis |
|
I worked on polarotor management in the case of an AZ/EL mount like the EGIS engine.
Based on a chaparral corotor and with the basis that we use a dielectric for the circular C band.
The maximum polarization setting is about 55° east and west (but reversing the H and V setting through due south).
Moreover in the case of a circular polarization with a dielectric the values L and R remain almost identical (45° compared to the surface of the dielectric)
I added a function on the TV/RADIO button which allows you to force the opposite polar to facilitate the setting of the opposite polar.
With my corotor chaparral I get a stroke of +90° up to -90°.
Ich habe an der Polarotorverwaltung im Fall einer AZ/EL-Montierung wie der EGIS-Engine gearbeitet.
Basierend auf einem Chaparral-Korotor und mit der Grundlage, dass wir ein Dielektrikum für das kreisförmige C-Band verwenden.
Die maximale Polarisationseinstellung liegt bei etwa 55° Ost und West (jedoch unter Umkehrung der H- und V-Einstellung genau nach Süden).
Darüber hinaus bleiben bei einer zirkularen Polarisation mit einem Dielektrikum die Werte L und R nahezu identisch (45° gegenüber der Oberfläche des Dielektrikums).
Ich habe der TV/RADIO-Taste eine Funktion hinzugefügt, mit der Sie die entgegengesetzte Polarität erzwingen können, um die Einstellung der entgegengesetzten Polarität zu erleichtern.
Mit meinem Korotor-Chaparral erhalte ich einen Hub von +90° bis -90°
https://satclub-thueringen.de/images/blu...letypes/jpg.gif
https://satclub-thueringen.de/images/blu...letypes/jpg.gif
https://satclub-thueringen.de/images/blu...letypes/jpg.gif
https://satclub-thueringen.de/images/blu...letypes/jpg.gif
https://satclub-thueringen.de/images/blu...letypes/jpg.gif
https://satclub-thueringen.de/images/blu...letypes/jpg.gif
|
|
Thema: positioner |
|
if the distance between the elevation axis and the attachment point of the elevation cylinder are very close, the movement is very short and the accuracy poor.if I reduce the speed of the elevation motor too much, the arrival of the pulses is delayed and the message "elevation PB" appears.I will offer you a version where the elevation will be slow and the delay before error lengthened, it can improve your problem.
Wenn der Abstand zwischen der Elevationsachse und dem Befestigungspunkt des Elevationszylinders sehr gering ist, ist die Bewegung sehr kurz und die Genauigkeit schlecht.
Wenn ich die Geschwindigkeit des Elevationsmotors zu stark reduziere, verzögert sich das Eintreffen der Impulse und es erscheint die Meldung „Elevation PB“.
Ich werde Ihnen eine Version anbieten, bei der die Erhöhung langsam ist und die Verzögerung vor dem Fehler länger wird. Dies kann Ihr Problem verbessern.
|
|
Thema: Egis |
|
here are the adapted files, I corrected an old error, I had reversed H and V in the bin file and asm and csv but not in the posi.
femilist8 and eeprom data
dial8b4 the new version for this data
femegi04.bin the new firmware
Hier sind die angepassten Dateien, ich habe einen alten Fehler korrigiert, ich hatte H und V in der Bin-Datei und ASM und CSV vertauscht, aber nicht in der Posi.
femilist8- und EEPROM-Daten
dial8b4 die neue Version für diese Daten
femegi04.bin die neue Firmwar
https://www.satclub-thueringen.de/images...letypes/zip.gif
|
|
Thema: Egis |
|
the pol r and pol l columns are not yet used in the posi program, it is a proposal that I had made!
as you use 4 positions per sat I thought you didn't need it!!!
I still haven't understood why you need 4 positions if you have a C-band polarotor.
the program dial does not take into account either polr and l , I will modify it in this direction .
I send the new programs today.
Die Spalten pol r und pol l werden im Posi-Programm noch nicht verwendet, das ist ein Vorschlag, den ich gemacht habe!
Da Sie 4 Positionen pro Sitzplatz verwenden, dachte ich, dass Sie das nicht brauchen!!!
Ich habe immer noch nicht verstanden, warum man 4 Positionen braucht, wenn man einen C-Band-Polarotor hat.
Das Programmwahlrad berücksichtigt weder polr noch l, ich werde es in diese Richtung ändern.
Ich verschicke heute die neuen Programme.
|
|
Thema: Egis |
|
for the elevation everything is a question of words:
when the green key is pressed, the display reads "Goto HIGH" the elevation increases and the dish tilts backwards.
if this is not the case reversed, the two elevation motor wires in the posi or on the terminal block.
in the wrong direction the motor goes to block when we search for origin!!!!!
Für die Erhebung ist alles eine Frage der Worte:
Wenn die grüne Taste gedrückt wird, zeigt das Display „Goto HIGH“ an, die Höhe erhöht sich und die Schüssel neigt sich nach hinten.
Ist dies nicht der Fall, werden die beiden Elevationsmotorkabel in die Posi oder auf die Klemmleiste umgedreht.
In der falschen Richtung blockiert der Motor bei der Suche nach dem Ursprung!!!!!
Wenn ich vom Deutschen ins Französische übersetze, was gerade vom Französischen ins Deutsche übersetzt wurde, gibt es einige seltsame Dinge, es ist die Schuld von Google Translate!!!
Ich kontrolliere die englische Version, auf Deutsch kenne ich deine Sprache nicht, sorry!
|
|
|
Views heute: 131.354 | Views gestern: 215.574 | Views gesamt: 290.568.543
Satclub Thüringen seit 01.07.1992 =
Online seit
Tage
|
Forensoftware: Burning Board 2.3.6, entwickelt von WoltLab GmbH | .: Impressum :. |
|
|